Feature:
1, MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated).
2, Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode.
3, Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes.
4, Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative.
5, FR-4 fiber glass PCB, dual copper layers.
Characteristic Parameters:
Input Signal Control Terminal:
Action Voltage: 3 ~ 32 VDC.
Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC.
Turn off voltage: 0 ~ 0.8 VDC.
In-Out isolation surge voltage: 7500V.
Output Terminal:
Load voltage range: 100 to 240 VAC (50/60Hz).
Max. on-state average current: 12 Amp.
Non repetitive surge peak on-state current: 120 Amp (<20mS).
Max. on-state voltage drop: 1.5V.
Max. off-state current: < 2mA / at 220VAC.
Off-state max. allow voltage: 400V.
Isolation: Phototriac.
Zero cross: Yes.
Load type: General purpose.
Input terminal block:
Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass.
Output(load) terminal block:
Wire range 26AWG ~ 10AWG / 4mm square, Strip length 8mm, Screws - M3, steel, Cr3+ Zn plated. Pin header and Cage - Brass.
Datasheet: https://www.czh-labs.com/tmp/madeimg/datasheet/d-1304.pdf
USD
EUR
GBP
CAD
AUD
